What is wpa key on Samsung printer

Having it to support existing signout flows

Z6_M0I02JG0KGSS30ACT8MPG200G1

Some features of the tool may not be available at this time. We apologize for this inconvenience and are addressing the issue. Minimize Chat bot window Loading Chatbot New Message

If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below.

  • Network-connected computer

  • Software CD that was provided with your machine

  • A machine installed with a wireless network interface

  • USB cable

Creating the ad hoc network in Windows

  1. Turn on your computer and the wireless network machine.

  2. Insert the supplied software CD into your CD-ROM drive.

    If the installation window does not appear, click > > > .

    X:\ replacing “X” with the letter, which represents your CD-ROM drive and click .

    • For Windows 8,

      If the installation window does not appear, from , select > and search for . Type in X:\Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click .

      If “.” pop-up window appears, click the window and select .

  3. Review and accept the installation agreements in the installation window. Then, click .

  4. Select on the screen. Then, click .

  5. On the screen, select Then, click .

    If your printer is already connected on the network, select .

  6. Select on the screen. Then, click .

  7. After searching the wireless networks, a list of wireless networks your machine has searched appears. Click .

  8. The window showing the wireless network setting appears. Check the settings and click .

  9. The window appears. Click .

  10. When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click .

  11. Follow the instructions in the installation window.